GeekVape Aegis MOD, designed by Geekvape GM Justin and Invader mini's chief designer, brings you a legendary TC box mod. It features a waterproof, shockproof and dust-proof design by adopting advanced LSR Injection Moulding technology. It adopts one of the most advanced chip with real rated power and 0.015s instantaneous firing. It supports a maximum 100W output power with a single 26650 battery cell or 18650 cell.
Size: 37.8 x 46.8 x 88mm
MAX power output: 100W
MAX firing duration: 10s
MAX voltage duration: 9V±0.1V
Output mode: VW/ VPC/TC/TCR/BYPASS
Material: Aluminum + Zinc alloy + silicone
Battery: 1x 26650/18650 cell (includes a 26650 cell)
Temperature Range: 100-300℃/200-600℉
Operating temperature: -40℃ - 80℃
Level: IP67 waterproof and dustproof; MIL STD 810G-516.6 military grade shockproof
It comes with
Simple packing. Customary packing from the factory, the packing is subject to change without notice.
Waterproof, Shockproof and Dust-proof
Real rated power and instantaneous firing - 0.015 seconds
100W output power
Supports both 18650 and 26650 cells
Attention: Although this device is designed to be waterproof and shockproof, please DO NOT expose it into water or damage it on purpose.
In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils and must be built with non-resistant wire.
This product is for advanced user only! Please have a great understanding and technical knowledge on how to use this product in order to properly use it. Use it at your own risk!
We highly recommend using an external battery charger for this battery mods, as it helps with balanced charging and prolong the life of the battery and mod.
Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. MyVpro.com and any of MyVpro.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
MyVpro.com and any or all of MyVpro.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment
Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose battery cells, chargers or any other electronic devices in accordance of local laws and mandates.
Posted by Matt Key on Sep 12th 2017
All it did was sent the battery lid receptacle next to the runner a bit. Nothing else. My previous mod broke the spring-loaded terminals in the bottom. The only com I have for this is a step down in battery life over my 2-cell mod, (obviously) and the as-shipped inaccuracy of the stainless steel thermal coefficient of resistance (TCR). To compensate, I just use TC-TCR mode at 0.0000105, which is the correct value for ss316L. The updated tcr value for stainless steel is still to low (0.0000091 as shipped v. 0.0000096 as updated). This seems to be ss317 or something else with lower nickel content. The only other issue is that with the switch to 20700 cells by Tesla away from 18650 will perpetuate the move towards these cells, and the mod didn't come with a lid compatible with the 20700
If there is information available as to how to acquire said battery lid, i would be appreciative.
Posted by Charles DeShields on Sep 12th 2017
After reading reviews and specs, I took the plunge and purchased the Aegis. I have to say in all honesty, it met all of my expectations. It fires immediately, and I found all the various modes of vaping to be extremely accurate. It is very rugged and tough, so I don't feel like I have to handle it like a raw egg. I have NO conns to offer for anyone considering buying the Aegis. The only thing I had to do was upgrade to the lastest firmware from the Geekvape website. It was simple and fast. If you're on the fence on whether or not to buy one, I would say 100% to go for it. The Aegis is a definite win.
Posted by Unknown on Sep 4th 2017
Love it! This mod is everything I'd hoped it would be. Especially like the VPC (variable power curve) mode. If you like to build larger coils you can program it so that ramp up is almost instantaneous. Haven't used temp control but power, vpc, and by-pass are superb! Even accommodates the biggest attys! 5stars!!!
Posted by James on Aug 31st 2017
This is the best mod I have to date and I have a lot.
One issue I have is that it will not stay locked, after about 1 minute it goes into unlocked mode.
And I didn't get a battery with mine.
Posted by David on Aug 18th 2017
This mod has replaced my Wismec Presa 100s as my go-to for my 26650 platform. The mod is simply rock solid and performs well. I vape MTL with SS temp control and the battery lasts all day long every day.
Posted by Mark Gomez on Aug 8th 2017
I'm so happy I waited to get this .. feels great in the hand whether you finger fire or thumb fire.. heavy , but not too heavy, solid. Not too tall either which i like .button's are clicky, screen is clear which you can turn down the brightness if you'd like to conserve battery . Easy menu screen to navigate .. love that you can build super low .. I'm working a dual ss Clapton reading .07 and it hits like a beast on power , bypass and temp..also love you can throw 30mm attys on it too.. my tsunami pro looks good on it and my twisted messes 30 fits perfect .. add that with getting a battery for free basically because myvpro.com has the cheapest price anywhere even China ! And I got this in 3 days !.. thanks myvpro .. great price, great shipping and I'm in love with my new toy.